Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultramid® Advanced N4U41 LS BK - PA9T FR(40) - BASF

Material Data Center offers the following functions for Ultramid® Advanced N4U41 LS BK:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Ultramid A datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Proprietà Elettriche - Altre Proprietà - Proprietà Specifiche Materiale
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto
Partially aromatic polyphthalamide for injection molding and extrusion with strong mechanical properties especially at elevated temperatures and excellent chemical resistance for highly stressed parts, electrical insulating parts and cable ducts. The flame retardant is without halogens and can be characterized as polymer with extremely low water absorption and outstanding dimensional stability. It features a high melting point (300°C) and excellent melt stability.

Markets & applications
Automotive: Automotive electrics & electronics (E&E), sensors
E&E: Connectors, SMT (surface mount technology) applications
Consumer goods: Consumer electronics
Caratteristiche Fisichesecco/condUnitáNorma del test
ISO Data
Indice di fusione di volume, MVR 50 / * cm³/10min ISO 1133
Temperatura 325 / * °C -
Carico 5 / * kg -
Ritiro di stampaggio, parallelo 1.6 / * % ISO 294-4, 2577
Ritiro di stampaggio, perpendicolare 1.7 / * % ISO 294-4, 2577
Proprietà Meccanichesecco/condUnitáNorma del test
ISO Data
Modulo a trazione 3200 / 3200 MPa ISO 527
Carico unitario a rottura 60 / 60 MPa ISO 527
Deformazione a rottura 3.5 / 4 % ISO 527
Resistenza all'urto Charpy, +23°C 45 / 45 kJ/m² ISO 179/1eU
Resistenza all'urto Charpy, -30°C 45 / 45 kJ/m² ISO 179/1eU
Resistenzia all'urto Charpy con intaglio, +23°C 2.5 / 2.5 kJ/m² ISO 179/1eA
Proprietà Termichesecco/condUnitáNorma del test
ISO Data
Temperatura di fusione, 10°C/min 300 / * °C ISO 11357-1/-3
Temp.di inflessione sotto carico, 1.80 MPa 130 / * °C ISO 75-1/-2
Coeff.di dilatazione termica lin., parallelo 54 / * E-6/K ISO 11359-1/-2
Coeff.di dilatazione termica lin., perpend. 61 / * E-6/K ISO 11359-1/-2
Reaz. al fuoco spess.nom. 1.5mm V-0 / * class IEC 60695-11-10
Spessore provato 1.6 / * mm -
Yellow Card disponibile sì / * - -
Reazione al fuoco a spessore h V-2 / * class IEC 60695-11-10
Spessore provato 0.4 / * mm -
Yellow Card disponibile sì / * - -
Indice di ossigeno 37 / * % ISO 4589-1/-2
Proprietà Elettrichesecco/condUnitáNorma del test
ISO Data
Costante dielettrica relativa, 1MHz 3.5 / 3.5 - IEC 62631-2-1
Fattore di dissipazione, 1MHz 120 / 220 E-4 IEC 62631-2-1
Resistività volumica 1E13 / 1E13 Ohm*m IEC 62631-3-1
Res. Alle correnti striscianti superficiali - / 600 - IEC 60112
Altre Proprietàsecco/condUnitáNorma del test
Assorbimento d'acqua 2.9 / * % Sim. alla ISO 62
Assorbimento d'umidità 1.2 / * % Sim. alla ISO 62
Massa volumica 1180 / - kg/m³ ISO 1183
Proprietà Specifiche Materialesecco/condUnitáNorma del test
ISO Data
Numero di viscosità 120 / * cm³/g ISO 307, 1157, 1628
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione, Altre Estrusioni
Forma fisica disponibile
Nero
Caratteristiche speciali
Ritardante di fiamma, Senza alogeni, Stabilizzato o stabile al calore
Caratteristiche
Resistenza del fuso
Resistenza Chimica
Resistenza chimica generale
Applicazioni
Automotive, Elettrotecnica ed electrici
Disponibilità geografica
Nord America, Europa, Asia Oceano Pacifico, South and Central America, Near East/Africa
Altre informazioni
Stampaggio ad Iniezione
PREPROCESSING
Pre/Post-processing, max. allowed water content: .05 %
Pre/Post-processing, Pre-drying, Temperature: 120 °C
Pre/Post-processing, Pre-drying, Time: 8 h

PROCESSING
injection molding, Melt temperature, range: 320 - 340 °C
injection molding, Melt temperature, recommended: 330 °C
injection molding, Mold temperature, range: 100 - 160 °C
injection molding, Mold temperature, recommended: 140 °C
injection molding, Dwell time, thermoplastics: 5 min
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.